Txoj kev ua haujlwm ntawm tus pin hom Wood noo noo detector
1. Gear setting method: first press the gear setting key (SPECIES), then press the test key (TEST), the current gear value is displayed at this time, press the setting key continuously, you can continuously change the gear until you need it. 's gear.
2. Check before measurement: Set to 5th gear according to the above method, then remove the cap of the instrument, touch the probe on the instrument to the two contacts on the cap, press the test key, if the display is 18±1, it means The instrument is normal.
3 Kev Txiav Txim: Ntxig qhov kev sojntsuam ntawm qhov ntsuas rau hauv cov qauv ntoo kom txiav txim siab. Nias lub pob xeem, tus nqi tso tawm los ntawm qhov ntsuas yog qhov nruab nrab tsis muaj dej noo ntawm cov khoom kuaj. Thaum cov dej noo ntawm daim ntawv xeem tsawg dua 3, nws yuav tso tawm 3.0.
