Kev ntsuas ntse (AUTO).

 This measurement mode is default when power on. In this mode, DC voltage, AC voltage, resistance, continuity can be measured, and the meter can automatically identify the measurement signal.

1) Press POWER ON key to power on, display AUTO  and enter the intelligent measurement mode.

2) Insert the red probe into " INPUT " jack and the black probe into the "COM" jack.

3) Hu rau qhov kev sojntsuam ntawm qhov kev sojntsuam nrog rau ob qhov kawg ntawm qhov ntsuas lub zog los yog kev tiv thaiv (sib npaug), thiab lub ntsuas hluav taws xob yuav cia li paub txog cov teeb liab ntsuas.

4) When measuring the resistance, the resistance value is less than about 50 Ω The buzzer sounds and the indicator light is on.

5) Nyeem cov txiaj ntsig ntawm cov zaub.

CEEB TOOM: Qhov tsawg kawg nkaus ntsuas qhov voltage ntawm hom no: 0.8V

GVDA Tshiab Digital Multimeter T-RMS Nws Pib Range AC DC NCV Xim LCD Ntse Multimetro Tester Ohm Capacitance Hz Temp Voltage Meter GD119B: